Miumaeov Commercial Hot Melt Glue Spray Injecting Machine 900W Semi-automatic Adhesive Hot Glue Gun Dispenser Equipment for Industries
Product details
| Management number | 231173325 | Release Date | 2026/06/18 | List Price | US$114.34 | Model Number | 231173325 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
<p>This high-quality hot melt glue gun can be widely used for bonding, fixing, wiring, and insulating toys, decorations, small home appliances, handicrafts, electronic components, and so on. It has stable and superior performance and is a good helper for DIY design.</p> <p>This commercial hot melt glue gun is made of high-quality materials with a sturdy and durable appearance, good impact resistance, and heat dissipation. With stable and superior performance, it is a good helper for DIY design.</p> <p>Note: When using this machine, please be sure to wear safety gloves, goggles, and long-sleeved overalls to avoid being scalded by the high-temperature hot melt adhesive solution; Before adding hot melt adhesive, the tank pressure must be released; The maximum total air pressure is set at 4KG; The air path should avoid excessive water vapor; The glue capacity of the hot melt adhesive should not be more than 7 minutes of the tank capacity.</p> <p>Package Included</p> <p>1* Hot Melt Glue Dispenser</p> <p>1* Pedal Switch</p> <p>1* Conversion Plug</p> <p>1* Pressure Gauge</p>
- Model: X001
- Power: 900W
- Sol Speed: 3KG/HR
- Solvent Capacity: 3KG/HR
- Maximum Viscosity; 10000 CPS
- Working Temperature: 160-180°C
- Temperature Control Range: 0-300°C
- Always wear safety gloves, goggles, and long-sleeved overalls to avoid burns from hot liquid hot melt adhesive.
- 1. The gas circuit should avoid too much water vapor entering
- 2. The hot melt adhesive capacity must not exceed seven points of the capacity of the storage bucket.
- 3.The maximum total air pressure is set to 4KG
- 4. Before heating the melted glue, the pressure of the storage bucket must be released first.
- 1. Confirm the safety protection measures
- 2. Check if the machine is 110VAC and there is no fluctuation in the pressure
- 3. See if the temperature of the plastic bucket is set at about 170 degrees (different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier)
- 5. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.
- 6. Check if the air supply system is basically dry and the air pressure is stable
- 7. Power on and test the circuit of each part.
- 1. Connect the power and turn the power switch to ON
- 2. Check if the temperature of the temperature controller is within the above range
- 3. Check whether the pressure relief is turned in the direction of pressure holding
- 4. Connect the origin, set the pressure value, and start the operation
| Power type | Corded Electric |
|---|---|
| Brand | Miumaeov |
| Items included | 1*Hot Melt Glue Dispenser\n1* Pedal Switch\n1* Conversion Plug\n1* Pressure Gauge |
| Has written warranty | No |
| Model | X001 |
| Volts | 110 V |
| Watts | 900 Watts |
Bestseller ranking
Paint Guns and Accessories
Customers who viewed this product also viewed
Administration
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form