Chimney Fan, 60W Chimney Smoke Evacuator, Fireplace Exhaust Fan, Flue Fan, Chimney Draft Inducer, Chimney Exhaust Fan,9~16cm

Specification:Product name: Electric Draft Inducing FanPower: 60WVoltage: 190-240V( 110V-120V voltage, we will be equipped with a voltage converter)Color:A for Flue Diameter 9- 16cmB for Flue Diameter 12.5-16cmnote:1. Domestic chimney adopts induced draft fan, and the outlet temperature should not exceed 60 degrees. Otherwise, the induced draft fan will be damaged. Install the power cord at least 0.5 square copper wire2. When installing or removing, please turn off the power switch to avoid electric shock.3. The interface with the smoke evacuator must be fixed with waterproof insulating tape.4. The installation at the interface with the chimney must be firm, and the interface must be closely integrated with the chimney to get the best effect.5. When the induced draft fan stops working, attention should be paid to the backflow of smoke causing smoke to emerge.6. The smoke evacuator is placed on the chimney. The smoke exhauster must be more than 6 meters away from the fire source, otherwise the induced draft fan will be burned. The temperature of the chimney cannot burn the insulation layer of the power cord.Package Included1 *Induced draft fan

• ★ FOR FLUE DIAMETER - Power: 60W For Flue Diameter 9- 16cm and 12.5-16cm.
• ★ NO NOISE - One of the most common complaints when it comes to powerful cooling fans is that they make a lot of noise. Luckily, our oscillating fan ensures a quiet operation so you don't have to compromise when it comes to the comfort of your home.
• ★ APPLY TO - It is very suitable for fireplace accessories/Pizza Ovens/ Wood Stoves. The chimney induced draft fan creates an exhaust and induces the rapid release of smoke to prevent the smoke from escaping smoothly from the chimney due to the poor chimney.
• ★ NOTE - The household fireplace uses an induced draft fan and the outlet temperature should not exceed 60 degrees. Otherwise the induced draft fan will be damaged. Install the power cord with at least 0.5 square copper wire.
• ★ VOLTAGE - The operating voltage of the product is 220V( 110V-120V voltage, we will be equipped with a voltage converter),the chimney induced draft fan is used by leaving two ends of the wire for connection to the power source.